Chertyozh Grindera

.com/other/chertej/52578-zlin-z-50l-chertyozh-ru-modeli.html 2011-05-11 0.6.armourbook.com/video/52018-sons-of-guns-s01e05-coffee-grinder-gun.html. May 20, 2016 - 4. Before assembling the beams, remove the bevel from the sharp edges. Building and engineering contracts by b s patil pdf. You can use a planer or coarse grinding belt (grain size 60 / 80).

Homemade shotgun for hunting underwater canmade of various materials. At the same time, the weapons of harpoon and traumatic action are distinguished.

The lethal force depends on the principle of operation and the components used in the design. Consider the features of the most popular modifications.

Homemade air rifle Such a model can be assembled if availablethere are parts from an automatic analog. First, the stem part is removed, then attached to the bottom of the cage at a distance of about 40 millimeters.

Mounted sheptalo and compensators. Depending on the design of the fuse, the last elements can not be installed. The ramrod is attached to the base of the clip.

Place the safety lock on the line side. It is worth noting that the feeder must not touch the safety ring during operation. Model with a pair of springs Homemade shotgun of this modification hasrather complex construction. You should use a wide clip and choose a suitable pipe. Then the sear is mounted on it. It is desirable to make a winding along the edge of the barrel.

The fighting spring mechanism is fixed tocentral axis, but without contact with the line. After mounting the springs proceed to install the feeder. The slide should be placed next to the clip. Alternatively, a winding can be used for this purpose. In addition, you can install the pads and the locking latch. How to make a gun with a solid line? Such models are among the mostcommon variations.

The feature includes the possibility of using all clips and compact dimensions. At the same time, a wide whisper to such rifles does not fit. Assembly begins with the barrel, the screws are attached to the front and rear. Then the holder is mounted. If the homemade shotgun is supposedto install a clip made by one's own hands, it is necessary to calculate the length of the sear.

The edges of the knot should be carefully sharpened and cleaned using a file or emery stone. Then the line and fuse are installed. At the final stage, the descender and the ramrod are mounted. After the installation of the compensator, fix the fighting spring. Modification with direct feeder To make a homemade rifleit is necessary to choose a pipe of suitable length and diameter. The minimum thickness of the element is 100 mm.

Next, cut the working channel, the depth of which should be at least 6 mm. If desired, the overlay is mounted, the cage is fixed after the installation of the sear. If necessary, a fuse(optional), a dense winding is performed, which allows you to reduce the impact of the shot.

The axis is desirable to choose steel, and the sear can be made of aluminum alloy. Compensators to this model fit almost any. The feeder as a result is carefully sharpened in such a way that he does not touch the slide. Variant with a pair of skid Such homemade guns are used forhunting.

As in the case with most analogs, you will need to select a suitable pipe to start the production. Its length should be at least 120 millimeters, and the thickness - 44 mm. After grinding, the channel is cut. Its width should not exceed 50 mm.

This jack is designed for placing the ramrod. Then a slide with a wide piston is installed. To fix the pipe, you can apply a hook, andthe clip must be made of wood.

If desired, add a metal patch. After the installation of the sheptal, a working spring is connected, the diameter of which must be at least 35 millimeters. At the last stage, the line and the trigger are mounted. Winding in this version, as a rule, is not used. The drawing of the gun is shown below. Hawaiian model This modification is designed for underwaterhunting, is equipped with metal pads and has a simple design.